Although your device does not support this download service, it can be used to view download information. Links to downloads can be sent via e-mail for download on a computer.
Z 30 Firmware
Select your operating system.
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.
-
- • This service supplies software that can be used to update the Z 30 camera “C” firmware to version 1.11. Check the camera firmware version before proceeding. You will not need to download this update if the firmware listed above is already installed.
- • This update includes all changes made in previous updates.
- • A card reader and computer are required for the firmware update.
- • Read the information below before proceeding.
|
- Changes from “C” Firmware Version 1.10 to 1.11
-
- • Changed the default values for the following settings displayed when connecting wirelessly:
- - Encryption keys
- - The password displayed after the camera's default settings are restored
|
- Changes from Previous Versions
-
Changes from “C” Firmware Version 1.00 to 1.10
- • Added support for the iOS edition of NX MobileAir. Use NX MobileAir version 1.1.3 or later.
- • Added support for MC-N10 remote grips.
- • Added support for the power zoom feature available on some lenses.
- • Added support for EN-EL25a rechargeable Li-ion batteries.
- • A red frame is now displayed around the monitor during video recording to indicate that recording is in progress.
- • The elapsed recording time is now displayed during video recording.
- • The camera will now focus with each shot taken using an ML-L7 if [AF-C] is selected for [Focus mode] and [Release] is selected for Custom Setting a1 [AF-C priority selection] in the [CUSTOM SETTINGS MENU].
- • Autofocus has been improved so that the focus position will not change if the shutter-release button is pressed halfway during memory recall in any focus mode.
- • Focus-point selection for self-portrait mode using an ML-L7 has been improved.
|
- Viewing the Camera Firmware Version
-
- Turn the camera on.
- Press the camera MENU button and select [Firmware version] in the [SETUP MENU] to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Product Description
-
| Name |
Z 30 “C” Firmware Version 1.11 |
| Supported cameras |
Z 30 |
| Supported camera firmware versions |
“C” firmware versions 1.00–1.10 |
| File name |
Z_30_0111.bin |
| Copyright |
Nikon Corporation |
| Reproduction |
Not permitted |
- Updating the Camera Firmware
-
- Download the following firmware file to your computer.
Please make sure you have the downloaded firmware file on your computer.
• Z_30_0111.bin (the camera firmware)
- Using a card reader, copy “Z_30_0111.bin” to a memory card that has been formatted in the camera.
Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
End User License Agreement
