แม้ว่าอุปกรณ์ของท่านจะไม่รองรับบริการดาวน์โหลดนี้ แต่สามารถใช้เพื่อดูข้อมูลการดาวน์โหลดได้ ลิงก์สำหรับการดาวน์โหลดสามารถส่งทางอีเมลเพื่อดาวน์โหลดบนคอมพิวเตอร์ได้
NX Tether
เลือกระบบปฏิบัติการของคุณ
โปรแกรมอัพเดตซอฟต์แวร์นี้มีไว้สำหรับผลิตภัณฑ์ของลูกค้าที่ระบุข้างต้น ("ผลิตภัณฑ์ที่ได้รับผล") และจัดให้เมื่อมีการยอมรับข้อตกลงที่ระบุด้านล่างนี้เท่านั้น การเลือก "ยอมรับ" และการคลิก "ดาวน์โหลด" แสดงว่าคุณได้ยอมรับข้อกำหนดและเงื่อนไขของข้อตกลงแล้ว โปรดแน่ใจว่าคุณเข้าใจข้อกำหนดของข้อตกลงดังกล่าวก่อนที่จะเริ่มต้นดาวน์โหลด
About NX Tether
-
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, where it can link with other software such as NX Studio. A simple, stripped-down design combined with an uncluttered, intuitive interface ensures that users will never find themselves at a loss. If you wish to display the view through the camera lens in the computer monitor while taking pictures remotely, use Camera Control Pro 2 (available for purchase separately).
- Notices
-
- • This software is distributed as a file named “S-NXTETH-010004WF-ALLIN-ALL___.exe”. Download and run the file to perform the update.
- • When performing the update, log in to an account with administrator privileges.
- • Before launching the installer, exit any other applications that may be running, including anti-virus software.
- • Users of Camera Control Pro 2 will need to upgrade to Camera Control Pro 2 version 2.35.1 or later.
- • Users of the Wireless Transmitter Utility will need to upgrade to Wireless Transmitter Utility version 1.9.8 or later.
- • Read the information below before proceeding.
|
- Product Description
-
Name |
NX Tether Version 1.0.4 |
File name |
S-NXTETH-010004WF-ALLIN-ALL___.exe |
Copyright |
Nikon Corporation |
Archive type |
Self-extracting |
Reproduction |
Not permitted |
System requirements |
Operating system |
- Microsoft Windows 11
- Microsoft Windows 10
Note: Pre-installed 64-bit editions only. |
CPU |
Intel Celeron, Pentium 4, or Core series, 1 GHz or better |
RAM |
4 GB or more |
Hard disk space |
A minimum of 500 MB available on the start-up disk (1 GB or more recommended) |
Monitor |
- Resolution: 1024 × 768 pixels (XGA) or more
- Colors: 24-bit color (True Color) or more
|
Interface |
Built-in USB port required. May not function as expected if camera is connected via a USB hub. Users who wish to connect to the camera via built-in Wi-Fi will need the Wireless Transmitter Utility. |
Supported digital cameras |
- • The Z 9, Z 8, Z 7, Z 7II, Z 6, Z 6II, Z 5, Z fc, Z 50, Z 30, D6, and D780
Note: Some of the above products may not have been announced or released in all countries or regions.
|
Notes |
- • NX Tether may not function as expected if used simultaneously with Camera Control Pro 2, Nikon Transfer 2, or other software designed to control or download pictures from cameras connected to the computer. Exit Camera Control Pro 2 and Nikon Transfer 2 before launching NX Tether.
- • Loading a settings file created with high-frequency flicker reduction enabled on the camera may result in shutter speed being set to a value different from that stored in the settings file.
|
- Changes from Version 1.0.3 to 1.0.4
-
- • Added support for the Z 8.
|
- Installation
-
- Create a folder on the hard disk and name it as desired.
- Download S-NXTETH-010004WF-ALLIN-ALL___.exe to the folder created in Step 1.
- Run S-NXTETH-010004WF-ALLIN-ALL___.exe to launch the installer.
- Follow the on-screen instructions to complete installation.
- Notices
-
- • This software is distributed as a file named “S-NXTETH-010004MF-ALLIN-ALL___.dmg”. Download and run the file to perform the update.
- • When performing the update, you will be prompted for the administrator password.
- • Before launching the installer, exit any other applications that may be running, including anti-virus software.
- • Users of Camera Control Pro 2 will need to upgrade to Camera Control Pro 2 version 2.35.1 or later.
- • Users of the Wireless Transmitter Utility will need to upgrade to Wireless Transmitter Utility version 1.9.8 or later.
- • Read the information below before proceeding.
|
- Product Description
-
Name |
NX Tether Version 1.0.4 |
File name |
S-NXTETH-010004MF-ALLIN-ALL___.dmg |
Copyright |
Nikon Corporation |
Archive type |
Self-extracting |
Reproduction |
Not permitted |
System requirements |
Operating system |
- macOS Ventura version 13
- macOS Monterey version 12
- macOS Big Sur version 11
|
CPU |
Apple Silicon or Intel Core or Xeon series, 1 GHz or better.
Note: NX Tether functions as an Apple Silicon native app on Apple Silicon computers. |
RAM |
2 GB or more |
Hard disk space |
A minimum of 500 MB available on the start-up disk (1 GB or more recommended) |
Monitor |
- Resolution: 1024 × 768 pixels (XGA) or more
- Colors: 24-bit color (millions of colors) or more
|
Interface |
Built-in USB port required. May not function as expected if camera is connected via a USB hub. Users who wish to connect to the camera via built-in Wi-Fi will need the Wireless Transmitter Utility. |
Supported digital cameras |
- • The Z 9, Z 8, Z 7, Z 7II, Z 6, Z 6II, Z 5, Z fc, Z 50, Z 30, D6, and D780
Note: Some of the above products may not have been announced or released in all countries or regions.
|
Notes |
- • NX Tether may not function as expected if used simultaneously with Camera Control Pro 2, Nikon Transfer 2, or other software designed to control or download pictures from cameras connected to the computer. Exit Camera Control Pro 2 and Nikon Transfer 2 before launching NX Tether.
- • Loading a settings file created with high-frequency flicker reduction enabled on the camera may result in shutter speed being set to a value different from that stored in the settings file.
- • NX Tether is not optimized for dark mode.
|
- Changes from Version 1.0.3 to 1.0.4
-
- • Added support for the Z 8.
- • Added support for macOS Ventura version 13.
- • Ended support for macOS Catalina version 10.15.
|
- Installation
-
- Download S-NXTETH-010004MF-ALLIN-ALL___.dmg.
- Double-click the downloaded file to mount an S-NXTETH-010004MF-ALLIN-ALL___ disk image containing a “Welcome” file.
- Double-click the “Welcome” file to launch the installer.
- Follow the on-screen instructions to complete installation.
- User's Manual
-
- We recommend you read the manual to understand the software basic operations before starting. For your convenience, this manual is also linked from the Help menu in the software.
-
NX Tether
Help
|